07-16-2017, 02:49 AM
Use an automotive auto adhesive and surface prep product called SEM-Solv. It is a fairly neutral but effective overspray and body molding adhesive solvent commonly used in preparation for autobody painting. Available in aerosol and quart cans with applicator tip.
Most automotive shops and parts retailers can get it. You can also use acetone, buy a quart can and use a clean piece of t-shirt to apply it, but don't leave it on long. Do this at your own risk!
Avoid ABS, Polycarbonate, or Lexan surfaces like your windshield, instrument lenses, and other plastics. Any cloudiness or dulling of your painted surfaces afterward can be easily polished out with a good non abrasive carnuba car wax.
Most automotive shops and parts retailers can get it. You can also use acetone, buy a quart can and use a clean piece of t-shirt to apply it, but don't leave it on long. Do this at your own risk!
Avoid ABS, Polycarbonate, or Lexan surfaces like your windshield, instrument lenses, and other plastics. Any cloudiness or dulling of your painted surfaces afterward can be easily polished out with a good non abrasive carnuba car wax.