Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thought I was done with the CB - trying again (forks)
#52
(08-27-2018, 04:58 AM)DBM_imp Wrote: Does anyone have a picture or illistration showing the 2014 damper rods? Im thinking about drilling the compression holes slightly bigger, and running 15 wt. fork oil with the spring preload full stiff. This should free up the compression to help with the harshness on bumps and slow down the rebound to control the stiff spring setting. Which holes are the compression control and which holes are the rebound control?

If you're even contemplating taking your forks apart you should just go ahead and install the cartridge emulators and new springs and enjoy the full adjustability that they bring. This would be your best bang for the buck.
Reply


Messages In This Thread
RE: Thought I was done with the CB - trying again (forks) - by Guth_imp - 09-02-2018, 05:00 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Thought this was a deal until... Gone in 60 22 1,180 03-16-2026, 02:06 PM
Last Post: Lord Popgun
  About to order the '17 dual bending valve forks for my '14 PowerDubs_imp 60 4,333 09-21-2021, 07:22 AM
Last Post: pekingduck
   CB1100 not so unremarkable as I thought Streetshark07_imp 50 4,148 11-02-2020, 03:47 AM
Last Post: Charlie Bravo_imp
  17 EX for $17,000.00 I thought the forum could use an evening laugh clearviewx 22 1,507 08-21-2019, 01:15 PM
Last Post: Cormanus
  still going to play with the front forks ohiorider_imp 5 568 08-13-2019, 09:31 AM
Last Post: peterbaron
  Thought I had my first problem Swartzracer_imp 13 942 07-25-2018, 09:20 AM
Last Post: peterbaron
  Hudson NY - Million to one shot...But thought I'd ask glenridgerich_imp 7 565 03-29-2016, 10:39 PM
Last Post: glenridgerich_imp
  your thought for the day the Ferret 5 383 01-03-2014, 12:58 AM
Last Post: rboe

Forum Jump:


Users browsing this thread: 1 Guest(s)