Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thought I was done with the CB - trying again (forks)
#28
Bob,

For free, you can also drop the oil fill level in the forks. There is plenty of oil for the damping function. The oil level [also] sets the size of the air chamber so by default it sets the "air spring". If you go lower (2" lower is safe) you can soften up the overall spring rate.

Jerry
Reply


Messages In This Thread
RE: Thought I was done with the CB - trying again (forks) - by spacetiger_imp - 07-24-2018, 08:32 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Thought this was a deal until... Gone in 60 22 476 03-16-2026, 02:06 PM
Last Post: Lord Popgun
  About to order the '17 dual bending valve forks for my '14 PowerDubs_imp 60 2,650 09-21-2021, 07:22 AM
Last Post: pekingduck
   CB1100 not so unremarkable as I thought Streetshark07_imp 50 2,875 11-02-2020, 03:47 AM
Last Post: Charlie Bravo_imp
  17 EX for $17,000.00 I thought the forum could use an evening laugh clearviewx 22 1,002 08-21-2019, 01:15 PM
Last Post: Cormanus
  still going to play with the front forks ohiorider_imp 5 394 08-13-2019, 09:31 AM
Last Post: peterbaron
  Thought I had my first problem Swartzracer_imp 13 645 07-25-2018, 09:20 AM
Last Post: peterbaron
  Hudson NY - Million to one shot...But thought I'd ask glenridgerich_imp 7 387 03-29-2016, 10:39 PM
Last Post: glenridgerich_imp
  your thought for the day the Ferret 5 266 01-03-2014, 12:58 AM
Last Post: rboe

Forum Jump:


Users browsing this thread: 1 Guest(s)