08-24-2026, 03:10 PM
I added a CB1100 2017 rear rack to my 2014 CB1100 DLX. It was difficult to find one for the 2014, so I found this 2017 on ebay for $150.
Replaced the 4 long side mount bolts with 8X1.25 80mm SS allen bolts. I had to remove the 4 larger spacers and replace them with smaller ones.
Also added 2 chrome spacers between the rack and the side garnish up front. (Thank You ACE Hardware)
I have about 3/4 inch clearance between the taillight housing and the rear rack. Very sturdy with grade 8 nuts in between the 2 rear grade 8 bolts.
Now I have a place to transport my 6 pack of beer!
Replaced the 4 long side mount bolts with 8X1.25 80mm SS allen bolts. I had to remove the 4 larger spacers and replace them with smaller ones.
Also added 2 chrome spacers between the rack and the side garnish up front. (Thank You ACE Hardware)
I have about 3/4 inch clearance between the taillight housing and the rear rack. Very sturdy with grade 8 nuts in between the 2 rear grade 8 bolts.
Now I have a place to transport my 6 pack of beer!
