08-10-2026, 11:14 AM
(This post was last modified: 08-10-2026, 11:17 AM by peterbaron.)
....and the wires, including the serial data line, must have a resistance not exceeding 0.5 ohms... The measurement should be taken with the components disconnected to check the resistance of the wire itself, rather than that of the system elements... The cause may be a poor contact that can be remedied by disconnecting and reconnecting the relevant connectors.
"Drop a gear and disappear"®
'24 Kawi Z650RS - Hooligan®
'14 CB1100 DLX, s/n 170, 42K kms - FOX®
'14 CB1100/ABS, 134K kms - sold
'13 CB1100/c-ABS - 56K kms - sold
*Grand Chancellor*
'24 Kawi Z650RS - Hooligan®
'14 CB1100 DLX, s/n 170, 42K kms - FOX®
'14 CB1100/ABS, 134K kms - sold
'13 CB1100/c-ABS - 56K kms - sold
*Grand Chancellor*