(08-24-2025, 10:54 AM)Lunchbag Wrote: I departed home this morning, but I only got ~25 miles from home. The bike started missing. I suspected the #3 plug wire due to what happened when I changed spark plugs last week. When I pulled the wire off the #3 plug, part of the wire remained on the plug. Photo below. So at that time I removed the part from the plug, and I figured I'd try to put the part back on (in) the wire. I pushed it into the wire and it took a lot of force but went in. Felt like a decent friction fit, so I reassembled all and it has been running flawlessly until this morning.Me 2, noticed the same issue during spark-plug replacement, however, on cylinder number 1.
Part of the cap booth stayed on the spark-plug - exactly as per your picture.
I pushed it back and so far worked ok.
Don't understand how it happened.
