07-17-2025, 08:07 AM
(This post was last modified: 07-17-2025, 02:01 PM by Lord Popgun.)
Bob,
A Jedi full you now are! Yoda speech learn you must now
Yes, lets see those new tools!
Cormanus,
I actually have one of thosenhammer impacts. I actually used it to remove radar test benches from most of our aircraft carriers avionics shops. They are (were) bolted to the deck with big phillip head screws that had been in since the boats were built. And they won’t come out with a screwdriver or speed handle. So I would bring in my impact driver. Most of the shop sailors had never seen one. The mechs did, but didn’t have any so couldn’t loan me one. Fun times.
A Jedi full you now are! Yoda speech learn you must now
Yes, lets see those new tools!
(07-16-2025, 04:37 AM)Cormanus Wrote: You're a champion, Bob.
Tell me about the impact driver. Is it a new-fangled electrical one? Or is it one of those marvellous old-fashioned beasts where you put the bit in the screw head and give the end a belt with a hammer?
Cormanus,
I actually have one of thosenhammer impacts. I actually used it to remove radar test benches from most of our aircraft carriers avionics shops. They are (were) bolted to the deck with big phillip head screws that had been in since the boats were built. And they won’t come out with a screwdriver or speed handle. So I would bring in my impact driver. Most of the shop sailors had never seen one. The mechs did, but didn’t have any so couldn’t loan me one. Fun times.
Holder of the CB1100forum Secret Decoder Ring
2012 ST1300
2013 CB1100
I find your lack of RLETs disturbing
2012 ST1300
2013 CB1100
I find your lack of RLETs disturbing