What is the most annoying thing that happens to you on the bike?

[GoldOxide_imp]

I actually have some solid vinyl flooring material the Navy (and no doubt others) uses and mounts/moves some heavy duty equipment on. I have it in my garage and it will hold up. Or has so far. Does show dents if the bike is on the center stand too long.

BUT, post a pic after your mod. I might want to do it.

Here is an update.
I used Rubbermaid shelf bracket to modify my dolly, investment, about C$7.00

UPDATE
LP, just to let you know that the nuts thickness must not exceed 3 mm, otherwise it might drag against the garage floor under the CB's weight...and I have a very smooth/epoxy floor.
.....or instead of nuts, you may cut the tread in dolly's base and use bolts only.

UPDATE
LP, just to let you know that the nuts thickness must not exceed 3 mm, otherwise it might drag against the garage floor under the CB's weight...and I have a very smooth/epoxy floor.
.....or instead of nuts, you may cut the tread in dolly's base and use bolts only.
... or use large gauge pop rivets, heads pointing down.