Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
scoot's guide to some "cheap" cafe racer mods
Author Message
scooticus_imp Offline
First Service Completed


Posts: 12
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2014
RE: scoot's guide to some "cheap" cafe racer mods
#19



(03-28-2015, 10:44 PM)4fout2_imp Wrote:
(03-28-2015, 12:15 PM)scooticus_imp Wrote:
(03-27-2015, 07:16 PM)4fout2_imp Wrote: Did you have any fitment issues installing the pipemasters on the 2014 CB?

At first, I was concerned about the fitting as Peter Gray ( pipe masters ) was not entirely sure if it would fit a 2014ex. But it does fit and there is no issues whatsoever. You will have to remove your double stand and should you have the ex model ( 2014 / spoke / dual exhaust ), it is recommended that you get yourself a pair of o2 eliminator as the pipes only got 1 socket instead of 2. What i did was to remove the o2 sensors entirely.

I hope this answers your question

At first, I was concerned about the fitting as Peter Gray ( pipe masters ) was not entirely sure if it would fit a 2014ex. But it does fit and there is no issues whatsoever. You will have to remove your double stand and should you have the ex model ( 2014 / spoke / dual exhaust ), it is recommended that you get yourself a pair of o2 eliminator as the pipes only got 1 socket instead of 2. What i did was to remove the o2 sensors entirely.

I hope this answers your question
Yes you did. Thanks Scooticus. I already bought a set of Moriwaki but I like the pipmasters so much I am going to sell the Moriwaki and get the Pipemasters. They are the best sounding, like the old days, and best looking on this bike.

Anyone want a set of titanium Moriwaki duals email me.

At first, I was concerned about the fitting as Peter Gray ( pipe masters ) was not entirely sure if it would fit a 2014ex. But it does fit and there is no issues whatsoever. You will have to remove your double stand and should you have the ex model ( 2014 / spoke / dual exhaust ), it is recommended that you get yourself a pair of o2 eliminator as the pipes only got 1 socket instead of 2. What i did was to remove the o2 sensors entirely.

I hope this answers your question
Yes you did. Thanks Scooticus. I already bought a set of Moriwaki but I like the pipmasters so much I am going to sell the Moriwaki and get the Pipemasters. They are the best sounding, like the old days, and best looking on this bike.

Anyone want a set of titanium Moriwaki duals email me.

i will try and upload some video's on the bike and the exhaust in the next few days so you can check it out and ready yourself to get rid of your existing pipes.


03-29-2015, 02:17 AM
Find Reply


Messages In This Thread
RE: scoot's guide to some "cheap" cafe racer mods - by scooticus_imp - 03-29-2015, 02:17 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Aussieflyer's Cafe Racer - part 5 Aussieflyer 83 5,180 05-03-2025, 09:43 PM
Last Post: rdprdp01
  15k miles later and "Marion" is still my dream bike. Eonzhiglo_imp 6 438 03-10-2023, 01:54 AM
Last Post: pdedse
  fine cafe racer / brown saddle alprider 1 241 12-15-2020, 09:20 PM
Last Post: GoldOxide_imp
  "Over To Dover" sig_a_imp 2 310 06-05-2018, 08:36 AM
Last Post: sig_a_imp
  Actioncamvideo "Emmentaler-cheese country" alprider 7 451 05-01-2018, 06:28 AM
Last Post: alprider
  honda switzerland "RS" limited edition 2018 alprider 8 506 03-18-2018, 04:39 AM
Last Post: pdedse
  New color for EX and Neo Sport Cafe Acrobat_imp 6 502 12-30-2017, 10:46 PM
Last Post: Acrobat_imp
  Café job Cormanus 10 670 07-13-2017, 02:50 AM
Last Post: c-breezy_imp
  My CB1100 cafe racer Hive_imp 20 1,160 03-09-2017, 12:59 PM
Last Post: Cormanus
  Pro shot taken at "The Snake". Rebel73_imp 8 522 10-19-2016, 01:56 AM
Last Post: Rebel73_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)