05-30-2019, 09:40 PM
(05-30-2019, 05:46 PM)max_imp Wrote: Tend to agree with your last suggestion, taking it out of the frame seems like a repeat of the first "job".
There may be an option to do this out of season and cover the area's with some protection in the mean time, wax or black electrical tape, if it was me i would quietly check all the bolts they have worked on to see if they are not loose just to be sure, nobody is perfect but two people independently checking the same job can get pretty close.
Also on pic no5 the wiring is routed behind the swingarm shaft on my bike, not in between the engine and the swingarm and ends up behind the rh sidepanel's cover, i can make a picture if you wish.
Good find Max. That cable looks precarious in that position - almost looks like asking to be pinched in some manner.