Honest opinions please,part II

[FLYTYM_imp]

honestly, too spindly at the base, looks like a bobble head. I see what you were going for, but no lines flow. I read the thread, it was well done quality wise, kudos on that. but the final result does not work aesthetically. me? i would have dropped it down further, back a smidge, and filled in the base a bit more from the mount you are using.

please excuse my 'ms paint' skills but you get the point.

THANK YOU! That’s perfect! My intention was to allow enough of a gap to not blast the license plate with light but in the process kinda ruined it. I’ll make a shorter bracket and move a few things around. I looked into the Samurider taillight but it moves the taillight up towards the seat. The problem with the stock fender is it’s go provisions stamped in it that the stack taillight cover. I checked into having the fender smoothed out,too much money. Thanks everybody for the feedback,greatly appreciated. Back to the drawing board......................

THANK YOU! That’s perfect! My intention was to allow enough of a gap to not blast the license plate with light but in the process kinda ruined it. I’ll make a shorter bracket and move a few things around. I looked into the Samurider taillight but it moves the taillight up towards the seat. The problem with the stock fender is it’s got provisions stamped in it that the stock taillight cover. I checked into having the fender smoothed out,too much money. Thanks everybody for the feedback,greatly appreciated. Back to the drawing board......................
[url=https://postimg.cc/hQfSpRRr]