NC Deflector DX...

[furious_blue_imp]

With the three adjustment points on each side, there's a lot of flexibility. I have mine adjusted as low as possible. It sits on top of the headlight with the rake adjusted so that it just clears the gauges. I like to keep my helmet in the wind, so that the ventilation will work in the summer.

If you look at the CB11 pic on the Nat. Cycle site, they installed that one a couple of inches above the headlight with not so much rake. I'd guess that setup would be almost 3 inches taller than mine. You should be able to find a combination that works with some trial and error adjustments.

Good luck!

I tend towards having them as high as possible, way higher than the designers probably had in mind. Looks goofy, but mounted that way, the protection from such a minimal piece is great.