Going to ask Takashi for a refund

[HondaJon_imp]

We'll guys, I am going to ask Takashi for a refund on the TSR header. It has a fatal design flaw, It is sad because the quality of the components and chrome is first class and the header pipes look soo good.

The RTV blew out again today and I'm done. There is no way in hell RTV alone will hold up against the heat and pressure that an exhaust systems makes, oh, and I forgot the added resistance offered by the CAT. That's why every other system is welded, uses springs or clamps. TSR, what were you thinking???

Here is the google translate version of the instructions regarding the collector

Install the O2 sensor before installing the mounting joint EX EX joint (set part) (a collection section). Apply the liquid gasket that came with the pipe spigot inside the collecting portion. The project out to be too much paint, removal can become very difficult adhesive force becomes stronger, you may be used as a reference about the back half of the insertion portion. # I plug in the collecting portion 4 exhaust pipe 1 to #. I will mount to the inside of the frame mount in the same way as the original pipe muffler stay. The backside uses the M8 nut that comes with a genuine bolt mount bolt.




I'll let everyone know how things go with Takashi. I have often found that you will see the true character of a man when things go wrong.
Going to ask him for a credit towards the motogear titanium header. It has no cat and uses SPRINGS to hold the collector to the pipes.