Another exhaust thread

[jlhalsey_imp]

i have done this swap. search on "spoked wheels" which was my post on the first project i did on my 2013 CB 1100. Bought 2014 DLX exhaust system and hardware from Procaliber. It fits fine with a couple of caveats. The 2013 frame lacks a left side support bracket for the header. It also lacks a bracket to retain the center stand return springs for the 2014 center stand which moves the springs inboard to the center of the bike for left side exhaust clearance. also the ECU location on the 2013 frame interferes with the new return spring location and must be re-located where it sits on the 2014 frame. Ferret posted pictures of the 2014 component locations. a good fabricator can do this work, paint the new brackets and make it look OEM. Found a guy to do this in socal.