Exhausting Decison

[CIP57_imp]

Thanks for your input, CIP. So, if I'm reading it correctly, you're saying that I need to modify my fuel controller in order to avoid popping on decel? How much does that cost?

The only thing you need to do to avoid popping on decel is the pair mod, which is the cost of a bolt (10 cents) and 3 minutes of your time. Its a very simple mod

http://cb1100forum.com/forum/showthread.php?tid=1824

No need for a fuel controller, the bikes ECU will correct A/F ratio unlike bikes with carbs.

Look at Rick's Numbers with no PCV, perfect 13.0 a/f running much richer than stock running the full Yoshi. He is running a bit rich on top like my bike which a fuel controller can correct but not necessary. You will add 8% HP which you will feel in the seat of your pants.

[url=http://cb1100forum.com/forum/showthread.php?tid=4369&page=2]http://cb1100forum.com/forum/showthread....369&page=2

I piggyback controller can be added for additional fine tuning, Fuzzy's chart shows 92HP with a PCV and tune which is about 5hp more(no A/F ratio chart was shown) not sure if it was a happy dyno or not but his results are up there. Again the PCV is not needed for spot on throttle response.