Spring is here in CT & so is Christmas!

[Hedge_imp]

Thanks to Lola I now have the rear Posh turn signals on. They look and operate perfectly!
[url=http://s189.photobucket.com/user/HedgeFundGeek/media/Mobile%20Uploads/2015-04/B8DB51B9-0F51-4570-8582-6E6C38F22F53.jpg.html]

So here is the easy way to how it is done! The kit comes with a whole bunch of stuff to rig it. Between what they supply and what comes off the stock turn signal is enough to get the job done.
So here is everything you will need . . . The rest you can chuck into your spare nuts and bolts cup.
[url=http://s189.photobucket.com/user/HedgeFundGeek/media/Mobile%20Uploads/2015-04/630BAB5A-169F-4B7E-8E1E-4BEB0BE30FF1.jpg.html]
The kit comes with a long threaded tube that you pull the wires through and screw into the new turn signal.

Then you take the black washer with the little tab and stick it in the front if the Honda Grab Bar where the original turn signal was.
[url=http://s189.photobucket.com/user/HedgeFundGeek/media/Mobile%20Uploads/2015-04/7F0EB715-1AC7-449D-866D-4594E6611257.jpg.html]

You then slide the turn signal through the black washer with the wires going out the back and put on the washer, lock washer and nut and tighten it down with a 14 mm wrench.
[url=http://s189.photobucket.com/user/HedgeFundGeek/media/Mobile%20Uploads/2015-04/F68A03F8-425B-4155-905C-CF81B0A39CCB.jpg.html]
Do not forget to use some RTV Blue to hold everything in place!

Now that everything is in place and locked down good I put electrical tape on both sets of wires before I plugged them into the color coded No-Brainer plugs!
[url=http://s189.photobucket.com/user/HedgeFundGeek/media/Mobile%20Uploads/2015-04/D04D9FB0-0372-49FA-925C-E30D6BF23148.jpg.html]
I researched, using the service manual, how to get the front lights off and i have a solid plan which will include drilling out the size 6 hole into a size 8 hole and then noodling a solution for the front. Stay tuned more info will be posted. Tomorrow I get those headers on!