2013 Bar ID.

[4 Paws_imp]

I contacted Kaoko after the model they list for the CB100 (HND30-19) didn't fit. Their response:

"Could you please provide us with the following. Also specify if you have aftermarket grips, hand guards or handle bars fitted.
Measurements – please be accurate and use a Vernier calliper:
Handle Bar Internal Diameter (ID)
Handle Bar Outside Diameter (OD)
Specification of OEM bar weight fastener / bolt

On receipt of the above information I will advise what product will be suitable for your bike and specific throttle / hand guard assembly.
If we do not have a stock / shelf product item available we will then quote on the practicality and cost of a custom development."

Since they are asking such detailed and specific questions it sounds to me like they haven't made a unit for our bike yet. Found the throttle lock useful on previous bikes, rocker gets in way sometimes and other times just can't get adjusted right.

On my Ural I have a piece of cord hanging from the rearview mirror that I can wrap around handlebar in the gap between grip and bar to act as a friction lock. Hate to go so old tech on the CB1100.