Login

Randy B · 08-18-2013, 08:48 AM

(08-12-2013, 10:52 AM)ChipBeck_imp Wrote:
(08-12-2013, 09:34 AM)Deanohh_imp Wrote: You mean is the vibration normal or that the weights turning is normal????

Deanohh,

The bar end weight on the throttle side turns so if your hand is too far out while you are twisting the throttle the bar end will turn with the throttle. The one on the clutch side does not turn. If you don't want it to turn freely, grab the weight and tighten the Phillips head screw in the end of the bar weight. They can still be forced to turn by rotating the entire weight assembly inside the two rubber doughnuts that are wrapped around the ends of the interior weight.

Chip

Deanohh,

The bar end weight on the throttle side turns so if your hand is too far out while you are twisting the throttle the bar end will turn with the throttle. The one on the clutch side does not turn. If you don't want it to turn freely, grab the weight and tighten the Phillips head screw in the end of the bar weight. They can still be forced to turn by rotating the entire weight assembly inside the two rubber doughnuts that are wrapped around the ends of the interior weight.

Chip
I saw this and tested it on mine.....it didn't turn/move. Hmm.....

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	loose the arrow	jimgl3_imp	33	1,994	08-30-2021, 11:14 PM Last Post: the Ferret
	Rizoma Bar End Mirrors w/ Stock Bar Ends?	cb1100_dude_imp	2	381	09-04-2018, 04:06 AM Last Post: cb1100_dude_imp
	Threw on Rizoma grips and bar ends.	silascopathic_imp	9	770	06-01-2018, 02:23 AM Last Post: Mandrau_imp
	Chrome/Stainless bar ends	Chris Goldson_imp	10	628	11-19-2017, 04:56 AM Last Post: 2017EX_imp
	Engine Guards and Bar Ends	metallyguitarded_imp	57	3,148	04-24-2015, 06:08 AM Last Post: metallyguitarded_imp
	'14 Deluxe chrome bar ends on '13?	pechorin75_imp	6	479	09-02-2014, 12:33 AM Last Post: jlhalsey_imp
	Ordering OEM Silver Bar Ends???	redReno_imp	1	177	07-04-2013, 03:47 AM Last Post: HondaJon_imp

Linear Mode Loose bar ends?
Author	Message