pull back

[Southwend]

Of course I had a ROX riser sent to me and it really wants to work. However the problem is the electrical bundle that comes from the starter switch. All other cables appear to have enough slack. I need to see if there is someway to re-route these wires to come up by the tank, but in order to do so I will need to disconnect them at one end or the other. I will look at it today and see. Perhaps it is easiest to disconnect at the handle bar switch. The switch appears to have a couple of screws holding it together. But I am sure that there is more involved because it is always more difficult than it first appears.
just looked at an exploded diagram it appears that the wires plug into the back of the headlight. Much easier than my first idea.