Ram Mount X-Grip

[Lord Popgun]

I have an X grip too. It is great!

Eon, to use the accessory connector in the headlight shell or the one back by the battery, you pretty much have 2 options.

1. Buy the matching connector and pins (and preferably the crimping tool). Crimp wires or your cig. lighter or whatever you want to the pins, then pin the connector (that means put the pins in the connector in the proper locations).

2. The easy way for the vast majority of people: Cut the accessory connector off and connect your cig lighter or whatever you want to the wires. The green wire is ground and the other is switched +12v. This method is how most have done it. Only 2 or 3 or so of us have done #1.

The accessory connectors have voltage ONLY when the ignition is on (they are switched, in other words).