06-04-2014, 03:56 AM
Ok, title may be a little dramatic but here's my little story. Ordered some Kijima engine guards from webike, only took 5 days from Japan so I was pretty excited.
http://japan.webike.net/products/9450147.html
Straightforward to put on, even with Japanese instructions, although I did break one of the two supplied bolts which didn't impress me much. Something new on the bike obviously requires a test ride, right? Great day, 70 degrees, partly sunny, nice day for a ride. Headed to some nearby twisties, not to actually test anything but just because it's fun. About halfway through the twisty part came into a yellow signed 35mph hour at about 50-55, fast enough to be fun but not exactly speed demon stuff. Halfway through the turn I started to scrape. First thought was footpeg, wasn't expecting it but there it was, no big deal. But it wasn't just scraping, it felt like it was digging and really unsettling the bike. I came up a bit but that wasn't going to work so went back down. I had probably let off the gas so that was the beginning of the end. I was heading for the gravel on the outside and didn't want to hit that leaned all the way over so plan B. Came back up, maybe I could still stay on the side and slow enough. Nope. Plan C, fairly shallow ditch just try to stay on while slowing. Worked fairly well but went over the handlebars right at the end. Picked up the bike and gave it a once over, no real damage just broke a mirror off. Started it and rode down the ditch a few feet til I could ride out then went down the road a bit to a pull off. Looked over it more carefully and cleaned out some mud but basically nothing had been damaged or even scratched. Rode home a little embarrassed and deflated but no worse for wear. After it was parked I looked at the footpeg and didn't see any scaping, kept looking around an saw this
![[Image: ecd2fff0fed71ea7dd6afac0e93f5065.jpg]](https://cb1100forum.net/forum/uploads/imp/201406/ecd2fff0fed71ea7dd6afac0e93f5065.jpg)
![[Image: fe4988fa7c9851036191faf53b372f24.jpg]](https://cb1100forum.net/forum/uploads/imp/201406/fe4988fa7c9851036191faf53b372f24.jpg)
Ok, they didn't really cause the crash, I could have handled it better, maybe I should have known better, maybe it's common knowledge the things stick way out, I should have thought....blah blah blah.
Anyway, learning experience, they are coming right back off, and for anyone else unaware like me, you've been warned!!!
http://japan.webike.net/products/9450147.html
Straightforward to put on, even with Japanese instructions, although I did break one of the two supplied bolts which didn't impress me much. Something new on the bike obviously requires a test ride, right? Great day, 70 degrees, partly sunny, nice day for a ride. Headed to some nearby twisties, not to actually test anything but just because it's fun. About halfway through the twisty part came into a yellow signed 35mph hour at about 50-55, fast enough to be fun but not exactly speed demon stuff. Halfway through the turn I started to scrape. First thought was footpeg, wasn't expecting it but there it was, no big deal. But it wasn't just scraping, it felt like it was digging and really unsettling the bike. I came up a bit but that wasn't going to work so went back down. I had probably let off the gas so that was the beginning of the end. I was heading for the gravel on the outside and didn't want to hit that leaned all the way over so plan B. Came back up, maybe I could still stay on the side and slow enough. Nope. Plan C, fairly shallow ditch just try to stay on while slowing. Worked fairly well but went over the handlebars right at the end. Picked up the bike and gave it a once over, no real damage just broke a mirror off. Started it and rode down the ditch a few feet til I could ride out then went down the road a bit to a pull off. Looked over it more carefully and cleaned out some mud but basically nothing had been damaged or even scratched. Rode home a little embarrassed and deflated but no worse for wear. After it was parked I looked at the footpeg and didn't see any scaping, kept looking around an saw this
Ok, they didn't really cause the crash, I could have handled it better, maybe I should have known better, maybe it's common knowledge the things stick way out, I should have thought....blah blah blah.
Anyway, learning experience, they are coming right back off, and for anyone else unaware like me, you've been warned!!!