Hyperpro suspension options for the CB1100

[Guth_imp]

Here is the information that I received from EPM (as of July 5, 2013):

Quote:The shocks come as either emulsion shock, with remote reservoir or
fixed or articulated piggy back reservoir.
The shock is called the " 3 D " model.
The available features are rebound damping, high and low speed
compression damping, ride height or length adjuster and remote pre-load
adjuster.

Please check our web site for more details, models and other
available products at http://www.epmperf.com

The Hyperpro shock has some advantages over other products
on the marketplace today.

--- It has a 16 mm shaft which is not only sturdier, but also displaces
more oil in the compression stroke so that you can regulate the compression
and rebound damping better.

--- The shocks have a new seal design which has been proven in tough
MOTO-cross competition use and showed that it is far better than others when
it comes to leakers.

--- The Hyperpro " 3 D " shock utilizes the "Bladder" technology when it
comes to separate the oil from nitrogen gas. Other manufacturers utilize a
floating piston. A floating piston always has to overcome stiction first
before it begins to move. A rubber bladder does not "know" what friction or
stiction is and therefore reacts smoother and quicker to pressure changes.

--- The Hyperpro shocks come with a progressive spring to ensure a compliant
ride and to prevent bottoming out under load.

The shocks come with a black spring.
A purple color spring may be available.


Front:
Hyperpro fork spring kit: consisting of Hyperpro progressive wound = rising rate fork springs with our recommendation of fork oil = $ 159.00

Rear shocks: Model 367 TS = $ 1,609.00
with adjustable rebound damping, with piggy back reservoir
and high/low speed compression damping, with threaded pre-load via the spanner wrench.


Rear shocks: Model 360 = $ 1,009.00
with adjustable rebound damping, with threaded pre-load via the spanner wrench.

Optional for all rear shocks:
LA = length adjuster for +/- 5 mm on the shock at $ 89.00/shock

Warranty = 5 years
All new shock purchases come with a “FREE” 1st service coupon.
The service is recommended between 25-30,000 miles.
The coupon is issued with the shock serial number and it is transferable to a new owner.

Delivery time : within 1-2 weeks to us plus shipping time to you.
We ship by UPS Ground.

S&H = $ 30.00

Please call the office in NJ at 732-786-9777 with your questions and/or order, or email us.