Windscreen that fits 2014

[hdvalente_imp]

I just put this 12 inch Puig on my 2014 today. https://www.revzilla.com/motorcycle/puig...-2013-2014

$126 at Revzilla, very easy install, free shipping. I haven't tried it, yet, so don't know how it will perform. I'm used to a giant, billboard-sized screen on the Victory I last rode for 16 years, so it will be different.

Hi JEB,
That is the one that I just tried on mine. The side screws touch the instruments, no clearance at all. I believe if you keep it installed permanently it shouldn't matter but I plan to remove it if not riding all day.

I have a 2014 dlx. In the fall and when on a trip, I use a cut down NC Street Shield EX. It bolts to the handlebars and upper fork legs. I have it so the top of the shield is approx 10" over the ign switch. There is approx 3/4" clearance above the headlight bucket. And maybe 1/2" clearance from the instruments, but all the clearances are adjustable. Anything over 10" and below 22" seems to create turbulence noise and head bobbling.

My head and neck are in clean air, the shield keeps the wind pressure off my chest ( and tank bag) which is really all I require. It is off right now for local riding in these temps, but will go on next week for my trip to Ark.

Do you have a side view of it?
I am thinking about this one from Samurider but it has 3 options for size:
https://www.samurider.com/?p=24784
Small


Medium


Large