chain cover and other questions

[baxtercat_imp]

Welcome, Baxtercat!

While there are a lot of options for replacement headers, I haven't seen any double wall chrome ones. Most are stainless or titanium alloys, which would have basically the same issues with discoloration.

The aluminum countershaft sprocket cover from the 14 DLX has been fitted to the '13 model by a few forum members. There should be a few threads about it. As I recall, the holes were slightly different and one of the three bolts didn't line up. The guys that did the conversion said that two bolts were sufficient to hold the cover on, and the third hole was filled with a cutoff bolt head for appearences.

Enjoy your new CB! I was kind of surprised that you found a basically new '13 ABS model. I remember that these were quite sought after in '13 and sold out well before the non-ABS models.

Edit : Here's a thread about the sprocket cover from Chip Beck. He and a few other members fabbed a small bridge to utilize all three bolts.

http://cb1100forum.com/forum/showthread.php?tid=5368

wonderful, flynn. exactly the info I was looking for. thanks!