A few changes - Ongoing Saga

[camoto_imp]

Camoto, what kind of stands are those and where can I get them?

The stands are the cheapo Venom stands from Amazon:
https://amazon.com/gp/product/B00AV8HN42

You'll also need a #19 pin which I was unable to find for the Venom stand, so I used the Pitbull #19 pin:
https://www.revzilla.com/motorcycle/pit-...-stand-pin

Finally, you'll need a different retaining pin (the pin that holds the #19 pin into the stand) because the Venom uses a larger diameter retaining pin than the Pitbull. I just used an old hardened screwdriver for this. The retaining pin supports the weight but if it broke the #19 pin would only drop about 1/2" down as it's flanged. If you have a lathe you could turn the Venom retaining pin (or drill the hole in the #19 larger) or just use a grade 8 fastener that fit the hole. Sounds complicated but if you buy the two items above it's insanely obvious when you have the parts in your hand.