A few changes - Ongoing Saga

[camoto_imp]

I've finished my take at replicating the Bad Seeds side covers. I made a template from images I could find of the BS side covers and modified the positioning slightly. Drilled 1 1/4" holes and used 5/32 inch hole 20 gauge perforated 304 stainless screen as a grate. I used plastidip as a paint to try to match the airbox covers as much as possible. It's not a perfect match but it's closer than flat black paint would have been.





Also installed the Dart flyscreen. Much better than the Puig in looks and barely different in wind protection.


Next up the WH small front fender.