Moriwaki headlight bracket.

[2017EX_imp]

I had looked into mounting configurations a while back, related to how a Dart Fly Screen would mount. As you noticed, the '17 bucket ears have a significant bend to them, while the '14 bucket ears are more flat. The reason for ear shape difference is in the steel rod frame the bracket ears bolt to, and the ear mounting flanges that are welded to the rod frame. Part #20 is the '17 frame in one diagram, part #21 is the '14 frame in the other diagram, and there are significant differences between the two.

You can see in the '14 diagram of part ( frame ) #21, that the ear mounting flange basically faces directly towards the front of the bike. By comparison, in the '17 diagram, part ( frame ) #20, you can see that the ear mounting flange is angled to the side and rear of the bike. I dont know if I said that well enough to be clear or not. Then too, at this point, we do not know if the distance between the mounting bolt holes in the '17 Moriwaki bucket brackets would match up with the holes in the '14 frame flanges.

From what I see on my 2017 bike and the diagrams, I think Web Bike is correct that it will not fit a 2014. Hope this helps.