Tires?

[DBM_imp]

DOT:
1. Tire-Tread Depth
Item and Method of Inspection:
Additional Inspection Procedure(s):
Inspect the tire tread to locate the area
where the depth is at its minimum.
Measure it at a major groove using a
suitable tread-depth gauge. Do not
measure tread depth on a wear bar. The
recorded tread depth must have been
measured at the minimum tread depth
location.

Reject if:

- tread depth is less than 2 mm = 5/64" at point
of minimum tread depth

Thank you for this info. I will measure and report back. Tire still works like new, and l only ride in good weather conditions.