Tank Removal...

[peterbaron]

I would like some more into on this Quick Release Fuel Connection, price, part number and where to get them.

I am looking for a Quick Release Fuel Connection for a bike build. I need to be able to disconnect and still be able to hold the fuel in the tank. I would like to have the option to drain afterwards too.

Any thoughts as to what would work best would be very appreciated.

These inexpensive quick disconnects are designed to be used with a petcock or gas valve. They do not have any check-valve on either side to hold fuel in the line, and will be open on both sides when disconnected.

Look for metal ones to do that, like those used for air compressor hose lines. Be sure they are fuel resistant. And if you use one like that, and have the check-valve end on the tank hose, it will not drain unless you put an open male coupler on it.

These inexpensive quick disconnects are designed to be used with a petcock or gas valve. They do not have any check-valve on either side to hold fuel in the line, and will be open on both sides when disconnected.

Look for metal ones to do that, like those used for air compressor hose lines. Be sure they are fuel resistant. And if you use one like that, and have the check-valve end on the tank hose, it will not drain unless you put an open male coupler on it.
+ 1 = Right on, do it right or do NOT do it at all!!!!!!!!!!!!!!!!!!!!