Moriwaki 4 into 4

[Houtman_imp]

Thanks again Amos for posting these pictures.
Just a few more comments on the 4 into 4 :
When I removed the stock header I was surprised how "loose" some of the inner nuts were , some I could just remove by hand. The torque is 16 ft/lb , checks yours ; you do not want to loose your nuts.....
The Moriwaki 4 into 4 is not loud , just a nice burbling sound , if you look for a louder exhaust a simple slip on is easier and cheaper to install.
Today I took the bike for a 100 mile run on the BRP , it is definitely stronger by about 4-5 hp , the shifting point is different on the mountain roads , feels stronger.
In the past I had an O2 sensor eliminator on the 2013 for a short while but after the 2017 O2 sensor code error I removed it also from my 2013.
However about 200 miles ago I put the O2 sensor eliminator back on the 2013 as I wanted to run the 4 into 4 without the sensor and yes it runs perfect without it !
Is the 4 into 4 worth the close to $2400 ? To me it is but other people might feel it is not. The whole world knows now what I paid except my wife ! Our policy is do not ask , do not tell ! No really she does not care as long as we have no debt and it makes me happy.