Acewell Speedometer

[arse-onist_imp]

Hey all.

First time poster, secret stalker.

Recently my speedometer was malfunctioning due to a bike wash using water jets. The meter was completely busted. No speedo, no RPM, no odo. Only fuel. The needle doesn't run when I turn the bike on.

Decided to pamper the girl a bit by getting myself an Acewell 4553s from Dime City. The guy mentioned that it could fit the bike no problem.

However, I have had issues with the speedometer as it is inaccurate (they used a magnet system just like you would see on a bicycle) and my fuel gauge doesn't go up down. According to the charts, there is a resistance number that you would have to indicate (100, 250, 510, -100, -250 -510) and that is a bit technical for me. The RPM default is set at 2000RPM but it sounds like 1000RPM on default.

Currently going by mileage using an app on my phone which uses the GPS. Pretty accurate.

Could you guys give me some tips?

Here's a pic of the current setup. (Let me know if you can't see it)