OEM Honda Fork Boots

[2017EX_imp]

I like your thinking , please post some pics after installed, thanks in advance.

Yes, I will be posting pics of the final product with boots, but with the stated delivery time at the moment, and getting the time to do the installation, it will probably be at least a couple of months down the road.

Although not particularly difficult to do, I have never personally done this MOD before. The shop manual, and YouTube videos I have studied all call for removal of both forks at the same time, except one video. That one particular video pointed out that if the boot installations are done one fork tube at a time, there will always be one fork tube holding fork alignment. This made absolute sense to me, and is something that may not have occurred to me had I not seen that video. Also suggested was attention to which bolts use thread locker, and anti seize on steel bolts into aluminum. Other than that, I would not recommend doing this MOD without using a torque wrench. Hope this info helps.