Dart Marlin Flyscreen - A Quick Review

[the_undecider_imp]

Having to use rubber pieces would not make me happy. Hopefully some re-engineering will be done to eliminate this issue. Is the bracket adjustable?

No adjustment. I'm not thrilled about using the rubber strips. There is a small bit of space between the bracket and instrument cups, but I figured it would likely make contact under the vibration and wind hitting it. I'm sure Steve will address the issue. A minor tweak of the upright brackets should be all it needs.

No adjustment. I'm not thrilled about using the rubber strips. There is a small bit of space between the bracket and instrument cups, but I figured it would likely make contact under the vibration and wind hitting it. I'm sure Steve will address the issue. A minor tweak of the upright brackets should be all it needs.
Hmm... the fitting is pretty close, but there should be a quarter inch or so between the bracket and the instruments. There is a small amount of tolerance in the screen brackets - try loosening all four screws that hold the brackets to the bike, and see if that improves the clearance.

No adjustment. I'm not thrilled about using the rubber strips. There is a small bit of space between the bracket and instrument cups, but I figured it would likely make contact under the vibration and wind hitting it. I'm sure Steve will address the issue. A minor tweak of the upright brackets should be all it needs.
Hmm... the fitting is pretty close, but there should be a quarter inch or so between the bracket and the instruments. There is a small amount of tolerance in the screen brackets - try loosening all four screws that hold the brackets to the bike, and see if that improves the clearance.
That was the first thing I did and it didn't do anything appreciable.