Jet Hot

[clearviewx]

So, I anticipated some downtime and decided it was a good time to get my headers, for my 2014 Standard, Jet Hot Coated. The brown color of the stainless pipes just didn't match the black and chrome theme of the standard.

I actually contacted Jet Hot back in February, 2017. I received a quote but the turn time was 21 work days so, I held off shipping them my headers. They did let me know they could do an 8 day expedite for an additional $100. The original quote was $265. I decided to wait. Oh, the quote was good for a year.

In June the turn time had dropped to 7 to 10 days so, I pulled the trigger and shipped them out, from California to Oklahoma, on June 19th.

UPS delivered them to Jet Hot on June 23rd.

They do not ask for billing information until the work is complete and they are ready to go.

I received the call for a CC number on July 6th.

They shipped back to me on July 7th.

I received them on July 13th.

Photos below.


The photo of the headers prior to installation includes the 4 crush gaskets and the rubber washer that holds the shield on the muffler. The original washer had fallen apart when I pulled it off.

If anyone knows the trick for holding the crush gaskets in place, while installing, please let me know. That was really the hardest part of the whole process.

I had to make the tool for removing the oxygen sensor. I just used my angle grinder and cut a slot in a 17mm socket.



Overall I am very happy with the service and results. The color is closer to a polished aluminum than chrome, I am good with that. There are minor flaws in the finish. Just have to realize it is a paint coating so any physical flaws in the original surface can be seen. I am okay with this as well.

Sent from my SM-T710 using Tapatalk

Looks so much better.