Emgo fairing

[Toddman_imp]

Don't these type of fairings just normally have forked brackets attached which slide under the bolts for the headlight bucket? dOes this fairing not have those?

No, no brackets of any kind. Or instructions what so ever.

No, no brackets of any kind. Or instructions what so ever.
There are two screws that go into the headlight and you will need to 'hog out' a little for the the headlight screws to go in and you will need to remove a tiny bit of material where the turn signals are. It's a very small amount. Use a dremel if you have one. There exists a hole in the bottom front of the fairing to connect a bracket to the horn brace but you'll have to fabricate one or get a small L bracket from your favorite hardware store. I didn't put a brace on the bottom but I probably will this summer. It works fine without one. As far as the sturdiness of the the fairing, it seems fine to me. I'm liking it for under $60.