White House K10 - a story of regeneration

[Ninemeister_imp]

Wing badges are backwards....beautiful bike !

I never even noticed they were handed!!


Thanks, will amend my schoolboy error accordingly.

That bike is STUNNING.

I'd say the best of the early style retro CB I have seen.

Only nitpicks I'd say-which are totally personal preference- would be to add shocks with a long chrome cover, remove the rear 'garnish' that don't fit the old style, and add a grab bar.

But that's me. You be you. And be VERY proud of the work you put into it and what the result is.

99% of people will think it is OLD.

Here is my old '76 for comparison-

Thank you!
And of course to make people think the bike was a lot older than it is was the plan from the outset - thanks to White House for making it happen.

That bike is STUNNING.

I'd say the best of the early style retro CB I have seen.

Only nitpicks I'd say-which are totally personal preference- would be to add shocks with a long chrome cover, remove the rear 'garnish' that don't fit the old style, and add a grab bar.

But that's me. You be you. And be VERY proud of the work you put into it and what the result is.

99% of people will think it is OLD.

Here is my old '76 for comparison-

The CB is on the road but that doesn't mean it's finished. As you rightly point out, the alloy doesn't work so well so I've already been working out how to replace the 2014 grab rails with an old school chrome tube version...

That bike is STUNNING.

I'd say the best of the early style retro CB I have seen.

Only nitpicks I'd say-which are totally personal preference- would be to add shocks with a long chrome cover, remove the rear 'garnish' that don't fit the old style, and add a grab bar.

But that's me. You be you. And be VERY proud of the work you put into it and what the result is.

99% of people will think it is OLD.

Here is my old '76 for comparison-

That's lovely.
I'm also glad I'm not the only one with the Honda wings pointing backwards.

As far as I know- the wings on my '76 were factory. That picture is from over 20 years ago- and to my knowledge the bike was stock and unmolested.



As for the side garnish- just take it off, and bolt on the grab bar.


That is what I did to my bike-

As for the side garnish- just take it off, and bolt on the grab bar.

That is what I did to my bike-


Looks great on a stock bike, but you can't use that grab rail with the K10 kit as the seat is modified to drop down over the sides of the rear frame section. More importantly, for a rail to visually work seamlessly in to the K10 style the rail needs to be set horizontally - i.e. on the same line as the bottom of the tank - which is the most characteristic design feature of the CB750.

Furthermore I will also have to incorporate brackets for the CB750 indicators, the originals being hollow splined shafts with the indicator housing clamped over.

No rush, I'll work something out that looks right when I get the time, but many thanks for your contribution.