07-20-2020, 04:42 PM
Pekingduck is spot on with his assessment as usual, however a little background may be helpful here.
The led unit has a " controller " which is a small plastic hermetically sealed box about 40 mm long in between the led unit and the original 3 pole halogen connector.
In my case i mounted the unit outside the headlight fixture for cooling purposes, mine still works so far but i fear Ennsinc's controller has followed the demise of Houtman's unit, i very seldom ride in the dark but am aware of the unpleasant surprise when chinese electronics revert to being a bit of sand ( silicon ) again and close the recycling loop despite their best efforts.
The led unit has a " controller " which is a small plastic hermetically sealed box about 40 mm long in between the led unit and the original 3 pole halogen connector.
In my case i mounted the unit outside the headlight fixture for cooling purposes, mine still works so far but i fear Ennsinc's controller has followed the demise of Houtman's unit, i very seldom ride in the dark but am aware of the unpleasant surprise when chinese electronics revert to being a bit of sand ( silicon ) again and close the recycling loop despite their best efforts.