Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Moriwaki 4-4 differences??
Author Message
2017EX_imp Offline
Been There


Posts: 389
Threads: 45
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jun 2017
RE: Moriwaki 4-4 differences??
#6

So I have toyed with the idea of a 4 into 4 for my 2017 EX, and the question caught my curiosity. As others have pointed out the difference between the first two links is that the second one is louder than the first. Both the first two links say that the center stand can be retained, but I would be "show me" on that one. Both the first two can be used on (2014 DLX not certain), 2017 EX, and the RS, all of which have two oxygen sensors. Here is a possible wrinkle: The stock 4 into two exhaust for those models have the sensor bung mounted vertically on the left and right outboard pipes, while the Moriwaki has the sensor bungs mounted horizontally on the outboard pipes. Could the horizontal bung placement be an installation benefit or nightmare....I dont know. I have not looked at some of the other 4 into 4 offerings closely enough to know, but zooming in on the Moriwaki picture I can see that there is good access to the rear axel bolt for chian adjustments and tire changes. Maybe this is what was meant by "short"? Stock: https://www.partzilla.com/catalog/honda/...-muffler-2

As we all know, the standard models have one oxygen sensor, and this may why the text in the third link listing says " impossible to mount to EX, RS". So as others have pointed out, the third link the the black exhaust is a 4 into 2. Stock: https://www.partzilla.com/catalog/honda/...-muffler-1

If I was going to spend that kind of money on an exhaust, I would go through Mr. T at Samurider instead of Webike. He is always very helpful and prompt in researching the correct part, and answering questions. I have purchased parts from Webike before, and they are OK, but are not great for answering questions. I have also found that occasionally the descriptions of parts can have inaccuracies, which is why I said "show me" concerning being able to use the center stand on the first two links. As to Moriwaki, I have found that their parts are very high quality, and have been very pleased with various other parts that they offer. Hope this helps. Biker


03-10-2021, 05:42 AM
Find Reply


Messages In This Thread
Moriwaki 4-4 differences?? - by PowerDubs_imp - 11-09-2020, 12:24 PM
RE: Moriwaki 4-4 differences?? - by Rox_imp - 03-03-2021, 03:35 AM
RE: Moriwaki 4-4 differences?? - by Cormanus - 03-03-2021, 08:25 AM
RE: Moriwaki 4-4 differences?? - by Rox_imp - 03-04-2021, 12:26 PM
RE: Moriwaki 4-4 differences?? - by Cormanus - 03-04-2021, 02:58 PM
RE: Moriwaki 4-4 differences?? - by 2017EX_imp - 03-10-2021, 05:42 AM
RE: Moriwaki 4-4 differences?? - by Houtman_imp - 03-10-2021, 05:58 AM
RE: Moriwaki 4-4 differences?? - by onlyju_imp - 07-08-2021, 07:01 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Moriwaki Exhaust Godzilla_imp 5 377 09-06-2023, 11:11 PM
Last Post: 12milesout
  Moriwaki 4 into 1 full pipe GS1100_imp 9 582 01-30-2022, 12:59 PM
Last Post: rich_imp
  Moriwaki Micron Oil Filter Henrik_imp 8 542 09-15-2021, 01:09 PM
Last Post: LikeAfox_imp
  Moriwaki rearsets Olof_imp 14 806 03-03-2021, 09:20 PM
Last Post: Olof_imp
  Yoshimura vs Moriwaki bioman_imp 9 602 12-06-2019, 07:01 AM
Last Post: the Ferret
  Moriwaki 4 into 4 Houtman_imp 37 1,862 06-26-2019, 04:47 PM
Last Post: Bazbro_imp
  2013 with Moriwaki 4 into 4 Houtman_imp 13 809 04-23-2019, 07:57 AM
Last Post: Houtman_imp
  Wanting the Moriwaki slip-on canister Inline4_imp 67 3,284 04-22-2019, 02:46 AM
Last Post: Rocky_imp
  Moriwaki Oil Filler Cap Henrik_imp 17 1,012 12-15-2018, 01:26 AM
Last Post: GoldOxide_imp
  Moriwaki headlight bracket. misterprofessionality 35 1,762 10-07-2018, 12:37 PM
Last Post: misterprofessionality

Forum Jump:


Users browsing this thread: 1 Guest(s)