My PCV/Autotune AFR Table and Fuel Map

[mvk24_imp]

After 2000 miles of riding, I thought I would post the fuel table that my PCV/autotune created for me. I think a lot of people have tried to find examples in the past so hopefully this is helpful. Before anyone copy/pastes this into their PCV, I do want to share the modifications of my bike and where I'm located:

2014 Std
Delkevic headers/mid pipe
Yoshimura RS-3 muffler
TSR air intake funnel plate
K&N air filter
Bored-out velocity intake stacks

Fresno, CA - 300 ft above sea level

If you do not have very similar modifications (on the exhaust AND intake side) or live in a similar area, I would highly recommend not copying my values. However, it does give you an idea of where the bike needs to get richer or leaner. I also need to note that your AFR table is likely different than mine, so you need to take that into account as well. If you are using the stock fuel map that has 13.2 across the board, my fuel adjustments are NOT recommended.

Thank you, thank you, thank you

I'm at about 0-400ft depending on where I am on the Island so this works as soon as I install the bored out intake funnels on my 2014.

Do you have the actual Map file folder link to copy and paste? I'll save it onto my software so its ready to go when I do it.

I've just been using the power commander generic file for the Yoshi slip on with my ECU flash.

I will be doing the Mizuno Full exhaust and thats when I'll throw my second pair of honed out velocity stacks in.

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca