Whitehouse K17 mods...

[Bazbro_imp]

The final fit of the modified CB750 front mudguard...

The excess of the brackets were cut off, buffed and shaped.  I decided to paint the brackets because of this scarring of the chrome.  But... silver or black paint??

The first coat of red oxide primer, ensuring that it gets into all the nooks and crannies where the brackets attach to the mudguard and where rust would otherwise form...





I decided,  while I was about it, to paint all the seams round the edge, underneath the m/guard, to properly rust proof it.  By not bothering to mask all of the underside, overspray will get all over the underneath of the m/guard, but I'm not worried about appearance - it's those cracks and seams where rust starts, that I need to cover and protect with paint.



Don't forget the cable guide that was cut off the strut... that needs the red oxide rust preventer, followed by a topcoat too.



Silver it is!  I have some 'Truck Bed Liner' spray, but that's a bit over-the-top, I think.  So a couple of passes of spray silver it is, maybe followed by a couple of coats of clear matte lacquer to make the brackets look nice.



The finished job...