(05-07-2022, 09:31 AM)gretle_2.0_imp Wrote: (05-07-2022, 09:28 AM)mvk24_imp Wrote: Is it possible the headlamp is aimed too far up since you had to remove the bolts to install the fairing?
I do not have the comet but I have the Emgo Venom ll that is the same design and I dont believe i have that issue anymore.
When I was using the Puig Universal and Puig Raptor windscreens they were a little forward of the headlamp like your problem now and at night the headlamp would refract off the inside of the windscreen and effected my night vision and I HATED it.
Thats why I eventually went with the Emgo Venom ll (couldn't afford the comets) and added auxilary lights to my engine guards.
Unfortunately I have not been able to ride the motorcycle since I did those upgrades last year but my brother and friend have taken it out for me and said there was no issue with the headlight lighting up the inside of the fairing and also said there was no issue with wind.
I will go in the garage now and see if I can get a photo for you of the fitment
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Again this is not the comet but basically a knock off (if you want to call it that) and fitment looks nearly identical to your photos.
Hopefully someone with a comet can help further![[Image: 9cbf39df359a4b100ba29eb137e3d622.jpg]](https://cb1100forum.net/forum/uploads/imp/202205/9cbf39df359a4b100ba29eb137e3d622.jpg)
![[Image: 6df4ccb795488e1fdf7820d6bf6ee2f8.jpg]](https://cb1100forum.net/forum/uploads/imp/202205/6df4ccb795488e1fdf7820d6bf6ee2f8.jpg)
![[Image: a119359ca845a8a3b1c2acff42750396.jpg]](https://cb1100forum.net/forum/uploads/imp/202205/a119359ca845a8a3b1c2acff42750396.jpg)
![[Image: 501f85d6707eb0a32049e65af13d2cf1.jpg]](https://cb1100forum.net/forum/uploads/imp/202205/501f85d6707eb0a32049e65af13d2cf1.jpg)
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Yeah I guess that makes sense, I’ll have to look at it tomorrow again and try to fix it. Thank you for the photos!
Yeah I guess that makes sense, I’ll have to look at it tomorrow again and try to fix it. Thank you for the photos! Yea maybe loosen up the bolts slightly and see if you can get a little play in adjusting the fairing.
Mine has about a 1 inch slot in each side for the mounting bolts so I have a little bit of adjustment forward and backward to get it to fit right.
You look like you have a little more space on the bottom of your light and I have a little more space on top so it might just me that your lamp is aimed a little too high after doing the installation.
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca