No more tuning CB1100??

[PowerDubs_imp]

I'll have to look up that shop- to my knowledge Guhl was the only place that had cracked our ECU to be able to bench flash.

Which TSR part are you referring to?

There is a simple TSR plate that replaces the intake snorkel on the airbox- it only makes about 2whp at the VERY top of the RPM.

I dyno tested it back to back- and since it made very little power, and made an intake noise that I didn't like, I did this now instead-

https://cb1100forum.com/forum/showthread.php?tid=15762



Then there are the the TSR velocity stacks that replace the stock ones in the airbox- they will make good power, but I don't know if they are still available, and they were expensive.

I would suggest this instead- https://cb1100forum.com/forum/showthread.php?tid=10300

Those modified stock velocity stacks have flowed enough air that I have made 103whp and 75wtq so far.


And lastly- right now I am in the middle of installing a new dual height velocity stacks I had custom made-

https://cb1100forum.com/forum/showthread.php?tid=17343