Mirrors

[Charlie Bravo_imp]

I futzed with the mirror mounting and did the simplest and easiest thing first, which was to put a rubber washer under the mirror stud. Wouldn't you know, I had no rubber washers. I guess I could have gone to the hardware store, but I'm pretty good at making it work with what I have at hand. I lifetime being around and owning boats helps. I found a piece of plastic hose, cut off about 1/2in, slit it open, and made a hole, then snipped off the corners. I put it in there and snugged it down, then went for a test. Lo and behold, it did help, some at least. The vibe is considerably less, and I'll probably get an O-ring and put it in there sometime, we'll see.