Crank Case Cover removal?

[motoWest_imp]

I know this thread is old, but I thought I would chime in with my experience. To make a long story short, I was unable to remove my cover. I drained the oil, removed all the bolts, got a rag and mallet and . . . . the dang thing wouldn't come off! I'm not sure if someone had removed it before me and applied a super gasket of some sort, but I was in my garage for two hours tapping and pulling and cursing.

In the end, I had to refill the bike with oil, apply some JB Weld to the hole in the stator cover (side-swiped in traffic, that's another story) and take it to the shop with my tail between my legs.

On the plus side, because I provided all the parts, the shop bill was only $90. In hindsight, I would've saved myself a lot of grief had I taken it there to begin with.