how to push/pull a CB backwards

[peterbaron]

Hi Peter,
A quick question when using your dolly.
Do you have to use a 2x4 under the motorcycle, I am assuming that the exhaust pipes will be touching on the dolly plate before the frame tubes.
Regards
Alain

A few years ago, I handled positioning my bike on the dolly by myself...now as I get younger, I only ask my son to pull back the bike = done.

I don't use my dolly daily during full/warm season but mostly at he beginning, end of it and for final winter hibernation, when both cars need to be parked inside of my garage. In the 2021 season this may change, as both of us got rid of our two old cars.

No need for 2x4 but to place the CB on the dolly only by myself, I'll get two 1" thick hard rubber blocks 10"x10" and place them under each wheel.
This combination will be a peanut as the dolly is just under an inch above the ground. There is no interference with anything, including the exhaust pipe...and do not think it will be with your '17 model of dual pipes.

Get ready for 2021 season, as we need to clock many more kms