05-17-2015, 10:50 PM
(05-17-2015, 12:35 PM)Ghis_imp Wrote:(05-17-2015, 03:13 AM)Headbanger02_imp Wrote: I know I can be (am) OCD, this doesn't bother me, on the other hand (sorry if this is a hijack) that exposed oil filter sure does.....
I agree! I tell myself if for better cooling...
(05-17-2015, 03:57 AM)Guth_imp Wrote:(05-17-2015, 03:13 AM)Headbanger02_imp Wrote: I know I can be (am) OCD, this doesn't bother me, on the other hand (sorry if this is a hijack) that exposed oil filter sure does.....
What about the slots in the fork preload screw heads not being aligned at the same angle?
Surely I can't be the only one who noticed this.
What about the slots in the fork preload screw heads not being aligned at the same angle?
Surely I can't be the only one who noticed this.
I noticed... It kills me, but since I can't fix it, I compartmentalize it, and try not to think about it. Hahaha! I am OCD.
I noticed... It kills me, but since I can't fix it, I compartmentalize it, and try not to think about it
. Hahaha! I am OCD.[/quote]
Easy fix 2 ways.
1) grab a big old flat head screw driver and turn them until they line up. They turn very easily and what little adjustment it takes to line them up won't mean squat to the preload.
2) IF they were all the way in or all the way out, you could still loosen the top and bottom triple clamp bolts (1 side at a time of course) and turn the fork tube until they line up. Then retighten the top and bottom triple clamp bolts.
if it were me I'd do method #1