08-14-2019, 11:58 AM
Are you saying the dowel pin dropped down into the rubber breather hose aft of the cylinders? If so, you're lucky. That breather doesn't go into the crankcase per se.
It goes into the breather passage at at the top of the block, makes a right turn and heads into the breather pipe in the clutch cover. It will be stuck in the breather pipe because it necks down severely.
Pull the clutch cover off, and the breather pipe will come off with it.
It goes into the breather passage at at the top of the block, makes a right turn and heads into the breather pipe in the clutch cover. It will be stuck in the breather pipe because it necks down severely.
Pull the clutch cover off, and the breather pipe will come off with it.