05-02-2016, 10:29 AM
Updates
Cleaned & lubed the advance unit, installed the points and wired them in.
![[Image: 832bfe16b3a4f8e18825ad04500ec8e8.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/832bfe16b3a4f8e18825ad04500ec8e8.jpg)
The stock oil filter is a centrifugal type. Not a big fan, so did a little research and came up with this. Uses a stock Suzuki oil filter cartridge
![[Image: b274d33912e171c8dd38440c015980bb.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/b274d33912e171c8dd38440c015980bb.jpg)
Instructions called for drilling a hole in the side cover.
![[Image: 96893feb36053bf692dcf34cca958f8d.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/96893feb36053bf692dcf34cca958f8d.jpg)
Also called to cut or machine the stock filter drum to 22mm
The section that's left is used as a spacer for the gears, washers & nut.
![[Image: e8e758d3953f2f7d8348f04b32df1524.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/e8e758d3953f2f7d8348f04b32df1524.jpg)
Assembly installed
![[Image: 8b3ec655a852f58fc1559a673600fafc.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/8b3ec655a852f58fc1559a673600fafc.jpg)
Wasn't looking right, so off it came. Broke out the sandpaper and buffing wheel.
![[Image: b8b4440b54015c84e77508fc715158e2.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/b8b4440b54015c84e77508fc715158e2.jpg)
Cleaned up the swingarm & shock assembly.
![[Image: 97f5a70e88eb7313518890b19dc4a6fd.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/97f5a70e88eb7313518890b19dc4a6fd.jpg)
Friend is stopping over tomorrow. He's got a cool Deutsch connector for the stator wires. More on this later.
Cleaned & lubed the advance unit, installed the points and wired them in.
![[Image: 832bfe16b3a4f8e18825ad04500ec8e8.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/832bfe16b3a4f8e18825ad04500ec8e8.jpg)
The stock oil filter is a centrifugal type. Not a big fan, so did a little research and came up with this. Uses a stock Suzuki oil filter cartridge
![[Image: b274d33912e171c8dd38440c015980bb.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/b274d33912e171c8dd38440c015980bb.jpg)
Instructions called for drilling a hole in the side cover.
![[Image: 96893feb36053bf692dcf34cca958f8d.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/96893feb36053bf692dcf34cca958f8d.jpg)
Also called to cut or machine the stock filter drum to 22mm
The section that's left is used as a spacer for the gears, washers & nut.
![[Image: e8e758d3953f2f7d8348f04b32df1524.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/e8e758d3953f2f7d8348f04b32df1524.jpg)
Assembly installed
![[Image: 8b3ec655a852f58fc1559a673600fafc.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/8b3ec655a852f58fc1559a673600fafc.jpg)
Wasn't looking right, so off it came. Broke out the sandpaper and buffing wheel.
![[Image: b8b4440b54015c84e77508fc715158e2.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/b8b4440b54015c84e77508fc715158e2.jpg)
Cleaned up the swingarm & shock assembly.
![[Image: 97f5a70e88eb7313518890b19dc4a6fd.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/97f5a70e88eb7313518890b19dc4a6fd.jpg)
Friend is stopping over tomorrow. He's got a cool Deutsch connector for the stator wires. More on this later.
