06-10-2019, 05:05 AM
I seem to recall (but don't take too much stock in my memory) that the dowels will come out. No mar pliers should pull them out. .
The bearing on the other hand; in theory should come out but in your case a new bearing is probably the best coarse to take.
There are higher output after market stators to be had (I put one in my bike after the original stator started to fail) so you can run things like heated gear. Not too expensive either.
The bearing on the other hand; in theory should come out but in your case a new bearing is probably the best coarse to take.
There are higher output after market stators to be had (I put one in my bike after the original stator started to fail) so you can run things like heated gear. Not too expensive either.