01-10-2022, 06:47 AM
One thing that the original owner added to the bike were two Lidlox brand helmet locks, which replace the bar end weights.
These cool little doodads let you put the helmet d-ring into the slot, and push a pin through to lock it. It can be unlocked with a little barrel key. He put one on both sides of the handlebars. I'll probably remove the left one and put it on the CB1100, since it's a universal 7/8" bar fitting.
These cool little doodads let you put the helmet d-ring into the slot, and push a pin through to lock it. It can be unlocked with a little barrel key. He put one on both sides of the handlebars. I'll probably remove the left one and put it on the CB1100, since it's a universal 7/8" bar fitting.
